Stainless steel oil transfer pumps

KCB stainless steel oil pump is introduced below:

KCB stainless steel oil pump introduction:

KCB stainless steel oil pump is mainly used for conveying lubricating oil in the lubrication system of various mechanical equipment. Stainless steel oil pump is relatively gray iron material, which can transport non-lubricating oil, drinks and low corrosive liquids. It is suitable for conveying viscosity of 5×10-6 ~ 1.5×10-3m2/s (5-1500CST).

Lubricating oils at temperatures below 300℃.

With copper gear can transport low inner point liquid, such as gasoline, benzene, etc.

This series of pumps in addition to the configuration of ordinary motor, but also according to user needs to configure the same specification of explosion-proof motor.

Structural features:

KCB series stainless steel oil pump The pump has a safety valve as overload protection;

The total backflow pressure of the relief valve is 1.5 times of the rated discharge pressure of the pump, and can also be adjusted according to the actual needs within the allowable discharge pressure range.

But note that the safety valve can not do long-term work of the pressure reducing valve, when necessary, it can be installed on the pipeline.

This series of gear pump is mainly composed of gear, shaft, pump body, safety valve, shaft end seal and other components, gear after heat treatment has a higher hardness and strength, and shaft together with the installation of replaceable shaft sleeve operation;

The lubrication of all parts in the pump is automatically achieved by using the conveying medium when the pump is working.

The pump has a reasonable design of oil drainage and oil return groove, so that the gear in the work under the minimum torque force, so the bearing load is small, small wear, high pump efficiency.

This series gear oil pump is mainly composed of gear, shaft, pump body, safety valve and shaft end seal.

After heat treatment, the gear has higher hardness and strength, and is installed with the shaft in the replaceable shaft sleeve.

The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.

The pump has a reasonable design of oil drainage and oil return groove, is the gear in the work under the minimum torque force, so the bearing load is small, small wear, high pump efficiency.

The pump is equipped with a safety valve as overload protection, the total backflow pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump, and can also be adjusted according to the actual needs within the allowable discharge pressure range.

However, note that the safety valve can not be used for long-term work of the pressure reducing valve, when necessary, it can be installed on the pipeline.

Looked from the overhanging end of the main shaft to the pump, it rotates clockwise.

Large flow gear oil pump, gear pump, unloading oil pump, oil transmission pump, raw oil pump, Marine gear pump, etc.

Flow: 1.1m3/h-600m3/h Pressure: 0.28Mpa -- 2.5Mpa.

Mainly used in oil fields, oil depots, ports, docks, ships and other large flow of oil, oil unloading!

Material: 304.316.316L stainless steel

KCB/2CY型号	流量 Q		转速 n r/min	排出压力 p Mpa	必需汽 蚀余量 r m	效率 η %	电动机
	m3/h	L/min					功率KW	型号
KCB-18.3	1.1	18.3	1400	1.45	5	44	1.5	Y90L-4
2CY-1.1/1.45
KCB-33.3	2	33.3	1420	1.45	5	44	2.2	Y100L1-4
2CY-2/1.45
KCB-55	3.3	55	1400	0.33	7	41	1.5	Y90L-4
2CY-3.3/0.33
KCB-83.3	5	83.3	1420	0.33	7	43	2.2	Y100L1-4
2CY-5/0.33
KCB-135	8	135	940	0.33	5	46	2.2	Y112M-6
2CY-8/0.33
KCB-200	12	200	1440	0.33	5	46	4	Y112M-4
2CY-12/0.33
KCB-300	18	300	960	0.36	5	42	5.5	Y132M2-6
2CY-18/0.36
KCB-483.3	29	483.3	1440	0.36	5.5	42	7.5	Y160M-4
2CY-29/0.36
KCB-633	38	633	970	0.28	6	43	11	Y160L-6
2CY-38/0.28
KCB-960	58	960	1470	0.28	6.5	43	18.5	Y180M-4
2CY-58/0.28
KCB-1200	72	1200	740	0.6	7	43	37	Y280S-8
KCB-1600	95	1600	980				45	Y280S-6
KCB-1800	112	1800	740	0.6	7.5	43	55	Y315S-8
KCB-2500	150	2500	985				75	Y315S-6
KCB-2850	170	2850	740	0.6	8	44	90	Y315L1-8
KCB-3800	230	3800	989				110	Y315L1-6
KCB-4100	245	4100	743	0.6	8	44	132	Y355M1-8
KCB-5400	325	5400	989				160	Y355M1-6
KCB-5600	330	5600	744	0.6	8	44	160	Y355M2-8
KCB-7600	460	7600	989				200	Y355M3-6
KCB-7000	420	7000	744	0.6	8	44	185	Y355L1-8
KCB-9600	570	9600	989				250	Y355L2-6