OIL PUMPS

Dynamic

Position:Oil Pumps > Dynamic >
For oil field pumps, small hot oil pumps are developed to solve the problem of water injection corrosion caused by high water mineralization. Develop heavy oil gathering and transportation pump, oil and gas mixed transportation pump, deep well turbine
Sales statistics of 405 hot oil pump manufacturers in China from 2015 to 2016
The structure, materials and auxiliary have put forward higher requirements for the hot oil pump system. The temperature of the transmission medium of the hot oil pump is described below. The different thermal cooling requirements and appli
The radial force acting on the circumferential direction of the impeller changes when the hot oil pump is working, because the impeller is affected by the hydraulic pressure and the meshing force of the impeller, while the hydraulic pressur
Why is the bearing oil level too high or too low bad? Answer: 1) the bearing oil level is too low, so that some parts of the RY hot oil pump bearing can not be lubricated, so the bearing will produce wear and heat, so that the bearing is bu
Colleagues in see favorable factors, we also must pay attention to the hot oil pump production technology in China is generally low, many key technology mainly rely on foreign, network mold that China sinomania pump enterprises should inten
Installation of hot oil pump 1. Preparations before installation 1) Preparation of technical data (1) Technical documents of design and pump should be prepared before construction, and construction plan of RY hot oil pump should be prepared
Before the customer orders the hot oil pump, if the customer requires reverse reversal, it can inform the technical personnel and adjust the steering of the hot oil pump to reverse. Hot oil pump can not reverse reverse operation without adj
Brief introduction to rolling bearing of hot oil pump 1: the roller and raceway of the rolling bearing should have no pits, rust spots and other defects, the cage is intact, the contact is smooth, and the rotation is without noise. 2: check
Safety precautions for maintenance 1: Before equipment maintenance, clean the equipment and pipeline, close the inlet and outlet valves of the hot oil pump or plug the blind plate, and isolate from the system. After passing the inspection a
40. What is the harm of overcurrent to high temperature hot oil pump? A: The rated current is the current that the motor normally works under the rated voltage and rated power. If the rated current exceeds the rated current, the motor is ea
Trends in research In order to improve the performance of hot oil pump and reduce the manufacturing cost, it is required to meet the design requirements of smaller volume, faster response, smaller pulsation and lower noise of hot oil pump.
Market characteristics and current situation of hot oil pump As the production system is not suitable for the development of productivity, most of the Chinese enterprises in the pump industry are not in a good mood, and many of them have st
Technical development trend of pump products
Appropriate restrictions on the development of products appropriate restrictions on the development of the product principle is: the production capacity of a serious excess of general pump products, excess capacity in the construction of investment ho
  • 首页
  • 1
  • 2
  • 3
  • 4
  • 下一页
  • 末页
  • 449
  • 0317-8296807
    kemaiind@outlook.com

    联系方式

    Address: Industrial Development Zone, Hebei Province
    TEL:0317-8296807 
    FAX: 0317-8181816

    Information navigation

    Trade news

    TEL:0317-8296807 FAX:0317-8181816 Email:kemaiind@outlook.com
    Quick Menu:China Oil Pumps | Pumps and Couplings Manufacturer In China | Oil Transfer Pumps