Construction and materials and auxiliary on hot oil pump

The structure, materials and auxiliary have put forward higher requirements for the hot oil pump system. The temperature of the transmission medium of thepump is described below. The different thermal cooling requirements and applicable thermal oil pumps of the company are described below:

1. For the temperature of the medium below 120℃, no special cooling system is usually set, and the media itself is used for lubrication and cooling.

Like hot oil pump, Botou hot water pump, hot water pump, pump parts, Botou hot oil pump, RY heat conduction oil pump, RCB heat pump, etc.;

And RY heat conduction pump and heat pump Wu 'an due to the suspension structure makes the temperature ceiling up to 140℃-160℃;

The highest operating temperature of RY heat conduction oil pump can reach 200 ℃;

Only Wu 'an heat pump temperature does not exceed 100℃.

It is worth mentioning that in order to facilitate the medium crystal or containing particles should be flush with the sealing surface of the tube.

2 for more than 120 DEG C, 300 DEG C medium, generally in the pump cover shall be provided with a cooling chamber, closed room should also be connected to the coolant, when the refrigerant is not allowed to permeate the medium should be taken by the cooling medium itself access.

The company has Botou RY RY heat conduction oil pump, hot oil pump for choice, in addition to Botou high temperature heat pump, can use media at 280℃.

3.

For the high temperature medium above 300℃, not only a part of the pump head needs to be cooled, but also a cooling system should be usually provided with the suspension bearing chamber. The pump structure is the central support form, and the mechanical seal metal bellows type is preferred.

The company only RY centrifugal hot oil pump temperature can reach 420℃.