K series high viscosity stainless steel gear pump

K series high viscosity stainless steel gear pump is suitable for conveying without solid particles and fibers, such as crude oil, diesel oil, lubricating oil, animal and vegetable oil, etc. Equipped with copper gear can transport low flash point liquid, such as gasoline, benzene, etc. Non-corrosive, temperature not higher than 70℃, viscosity of 5 ~ 1500CST or other similar properties of the liquid. If high temperature is required, the company can be equipped with high temperature resistant materials.

K-55 high viscosity gear pump overview and use

K gear type oil pump is suitable for conveying without solid particles and fibers, such as crude oil, diesel oil, lubricating oil, animal and plant oil, etc. Equipped with copper gear can transport low flash point liquid, such as gasoline, benzene, etc. Non-corrosive, temperature not higher than 70℃, viscosity of 5 ~ 1500CST or other similar properties of the liquid. If high temperature is required, the company can be equipped with high temperature resistant materials.
Product features
This series of gear pump is mainly composed of gear, shaft, pump body, safety valve, shaft seal and other components. Gear has high hardness and strength after heat treatment. All the moving parts in the pump are lubricated by the medium conveyed by it.
The pump has a reasonable design of oil drainage and oil return groove, so that the gear in the work of the minimum torque force, so the bearing load is small, small wear, high pump efficiency.
The pump is provided with a safety valve for overload protection. However, this safety valve can not be used as a long-term pressure relief valve, if necessary, can be installed on the pipeline.
K stainless steel gear pump performance
Flow range: 18.3L/min to 960 L/min
Head range: 30m~145m
Motor power: 1.5KW ~ 30KW
Note: If you have special requirements, please technical personnel!

型号规格	电机功率 (KW)	转速 (r/min)	流量 (L/min)	排出压力 (MPa/cm2)	允许吸上真空泵 (m)	进出口径
K18.3(2CY-1.1/14.5-2)	1.5	1400	18.3	1.45	5	3/4"
K33.3(2CY-2/14.5-2)	2.2	1420	33.3	1.45	5	3/4"
K55(2CY-3.3/3.3-2)	1.5	1400	55	0.33	5	1"
K55(2CY-3.3/3.5-2)	2.2	1420	55	0.5	5	1"
K83.3(2CY-5/3-2)	2.2	1420	83.3	0.33	5	1.5"
K83.3(2CY-5/5-2)	3	1420	83.3	0.5	5	1.5"
K200(2CY-8/3.3-2)	4	1440	200	0.33	5	2"
K200(2CY-12/1.3-2)	4	1440	200	0.13	5	2"
K200(2CY-12/3.3-2)	5.5	1440	200	0.33	5	2"
K200(2CY-12/6-2)	5.5	1440	200	0.60	5	2"
K200(2CY-12/10-2)	7.5	1440	200	1.00	5	2"
K300(2CY-18/3.6-2)	5.5	960	300	0.36	5	3"
K300(2CY-18/6-2)	7.5	1440	300	0.6	5	3"
K483.3(2CY-29-3.6-2)	7.5	1440	483.3	0.36	5	3"
K483.3(2CY-29-10-2)	11	970	483.3	1.00	5	3"
K633(2CY-38/2.8-2)	11	1000	633	0.28	5	4"
K633(2CY-38/8-2)	22	1000	633	0.8	5	4"
K960(2CY-60/3-2)	18.5	1450	960	0.3	5	4"
K960(2CY-60-6-2)	30	1450	960	0.6	5	4"
K2000(2CY-120/3-2)	30	750	2000	0.3	5	6"
K2500(2CY-150/3-2)	37	750	2500	0.3	5	6"

For more information, please see: Stainless steel gear pump china