K Y S N series gear pump

Introduction:
Gear pump is a rotary pump that relies on the working volume change and movement formed between the pump cylinder and the meshing gear to transfer liquid or boost it. Consists of two gears, pump body and front and back cover of two closed space, when the gear rotation, gear off the side of the space volume from small to large, the formation of a vacuum, the liquid suction, gear meshing side of the space volume from large to small, and the liquid squeezed into the pipeline.



Gear pump has the characteristics of simple structure, convenient processing, small volume, light weight, and strong self-priming ability, insensitive to oil pollution, so it is widely used. The following small series for you to introduce a gear pump.


K series rotary stainless steel gear pump is used to transport viscosity in 200°E (1500mpa.s) below a variety of non-solid particle impurities of mechanical oil, turbine oil and other lubricating properties and similar properties of other media, the temperature is not higher than 120°.

Y gear pump is a positive displacement pump. Its unique structure has self-priming ability, conveying oil pulsation is stable, high pressure, small wear, long service life, wide application, high efficiency.

S type gear oil pump is equipped with a safety valve as overload protection, the full backflow pressure of the safety valve is 1.5 times of the rated discharge pressure, which can be adjusted appropriately within the range of the actual process requirements of users. But this safety valve can not do the long-term work of pressure reducing valve, when necessary, it can be installed on the pipeline.

N series internal stainless steel gear pump is widely used in national defense research, petroleum, chemical industry, power generation, metallurgy, transportation, pharmaceutical, food and other departments. According to the process needs can also be derived into thermal oil pump, asphalt pump, anti-corrosion pump.