When conveying residual oil, the gear hardness of the selected
oil pump must be high, so that the service life will be long, our factory specializes in the production of ZYB slag oil pump, gear slag oil pump, good material gear hardness is high, long service life.
Can be used to transport residual oil, coal tar and other pressure up to 4MPa.
ZYB slag oil pump is not suitable for conveying corrosive, containing metal impurities, sand and stone impurities with particle diameter greater than 3mm and medium with high volatility and low ignition point.
Such as: gasoline, benzene and so on.
Specific selection please consult my factory sales staff.
ZYB-300 slag oil pump than ZYB-200 slag oil pump flow is about 6 cubic meters larger, the pressure is similar, the price is slightly expensive, the diameter is also increased, please pay attention to the selection, if you have any questions,
The gear type slag pump body and gear have high hardness and strong wear resistance. Model: ZYB. The high temperature slag pump is within 200 degrees, which is several times longer than the life of the ordinary gear pump.
ZYB slag pump is a kind of high quality wear-resistant slag pump, inside there is a pair of gear meshing each other fast rotation, ZYB slag pump pump body and gear are made of special materials, with high hardness and high strength, can impr
In order to facilitate installation, ZYB200 slag pump and KB200 gear pump have the same installation size. ZYB200 slag pump flow is 12 cubic meters per hour and the temperature is within 280 degrees.
ZYB633 slag pump flow rate 633 liters per minute; Zyb960 slag oil pump flow of 960 liters per minute, can transport residue, and has wear-resistant, long service life and other characteristics.