Position：Oil Pumps > Product > Dirt Oil Pumps > Gear type slag pump
Gear type slag pump
Production Place：
Suppliers：
EMAIL：kemaiind@outlook.com
Gear type slag pumpDetail Introduction
Product Introduction
Type: Gear type
Flow range: 1-60 cubic meters
Name: Gear type slag pump
Features: high temperature resistance, wear resistance
Model: ZYB
Alias: high temperature slag pump, high temperature gear slag pump
Structure: ZYB gear slag pump is a new product developed by our company on the basis of ordinary gear pump, which is mainly used for conveying coal tar, residual oil, heavy oil and other oil products containing certain impurities.
It is mainly composed of pump body, front and rear cover, gear and shaft, thrust plate and other parts.
Application: high temperature slag pump is widely used in petroleum, chemical industry, especially road construction machinery and equipment, road spraying, asphalt mixing station and other occasions.
Not only high temperature resistance and good wear resistance, (the use of special material made of) this greatly improves the service life of the pump itself.
Specific service life is based on the quality of the conveying medium, and the degree of particles, viscosity, temperature and other decisions.
Working life is also different in different occasions.
Table of selection parameters of high temperature gear slag pump:
| 型号 | 流量m3/h | L/min | 压力 MPa | 转速r/min | 吸上高度（M） | 口径 | 功率 KW | 电机型 号 |
| ZYB-18.3 | 1.1 | 18.3 | 1.45 | 1400 | 5 | G3/4" | 1.5 | Y90L-4 |
| ZYB-33.3 | 2.2 | 33.3 | 1.45 | 1420 | 5 | G3/4" | 2.2 | Y100L1-4 |
| ZYB-55 | 3.3 | 55 | 0.33 | 1400 | 5 | G1" | 1.5 | Y90L-4 |
| ZYB-83.3 | 5 | 83.3 | 0.33 | 1420 | 5 | G11/2" | 2.2 | Y100L1-4 |
| ZYB-200 | 12 | 200 | 0.33 | 1440 | 5 | 50 | 4 | Y112M-4 |
| ZYB-300 | 18 | 300 | 0.33 | 960 | 5 | 70 | 5.5 | Y132M2-6 |
| ZYB-483.3 | 29 | 483.3 | 0.33 | 1400 | 5 | 70 | 7.5 | Y132M-4 |
| ZYB-633 | 38 | 38 | 0.28 | 970 | 5 | 100 | 11 | Y160L-6 |
| ZYB-960 | 58 | 58 | 0.28 | 1470 | 5 | 100 | 18.5 | Y180M-4 |
| |
上一篇：ZYB slag pump 下一篇：Slag pump ZYB - 300
与Gear type slag pumpRelated Products
ZYB-300 slag oil pump than ZYB-200 slag oil pump flow is about 6 cubic meters larger, the pressure is similar, the price is slightly expensive, the diameter is also increased, please pay attention to the selection, if you have any questions,
The gear type slag pump body and gear have high hardness and strong wear resistance. Model: ZYB. The high temperature slag pump is within 200 degrees, which is several times longer than the life of the ordinary gear pump.
In order to facilitate installation, ZYB200 slag pump and KB200 gear pump have the same installation size. ZYB200 slag pump flow is 12 cubic meters per hour and the temperature is within 280 degrees.
ZYB633 slag pump flow rate 633 liters per minute; Zyb960 slag oil pump flow of 960 liters per minute, can transport residue, and has wear-resistant, long service life and other characteristics.
0317-8296807
kemaiind@outlook.com
联系方式
Address： Industrial Development Zone, Hebei Province
TEL：0317-8296807
TEL：0317-8296807
FAX： 0317-8181816
PRODUCT CATEGORY
News
Why is the gear slag pump heating?
What kind of ZYB slag pump has a long ser
Briefly talk about the use and structural
ZYB type gear slag pump gear carburizing
Optimization Design of ZYB Slag Pump Gear
Five points explain the development direc
ZYB slag pump is not inferior to any deve
Alloy steel ZYB slag pump mechanical seal
On August 11th, President Wang Bing of Bo
The function of ZYB slag pump was improve
Wear-resistant slag pump centralizer was
Botou oil pump casting industry status as
Botou Oil Pump Exhibition will be held fr
Zyb3/3.0 Slag Pump Structure and Starting
Gear slag pump into the development direc
