OIL PUMPS
Position：Oil Pumps > Product > Dirt Oil Pumps > ZYB slag pump
(ZYB slag pump)

ZYB slag pump

Production Place：
Suppliers：
EMAIL：kemaiind@outlook.com   

ZYB slag pumpDetail Introduction

Product Introduction
Flow range: 1-60 cubic meters per hour
Structure: gear type
Features: wear resistance
Working pressure: 0.3-2.5MPa
Overview: ZYB slag pump on the basis of the ordinary gear pump is our factory after the special craft processing and special processing to achieve the conveying of material contains some impurities such as residual oil, coal tar oil conveying, wear-resisting slag pump prices are relatively low, because of its structure determines the features, so still need careful reference in selection.
Structure: in order to be common with the common gear pump installation, the gear type slag pump of our factory adopts the horizontal installation, which is mainly composed of pump body, gear, front and rear cover of pump, pump shaft and other parts.
The whole machine and then add the bottom plate and the motor can be;
This pump gap automatic adjustment, and has a better self-priming performance, high efficiency and strong adaptability is his characteristics.
Main USES: Suitable for glass, foam, building materials, chemical industry, construction, petroleum, grain and oil industries.
ZYB Slag Pump Selection Parameters Table:
型 号

口径
mm

流量

工作压力MPa

吸入压力MPa

转速

电机

m³/h

L/min

功率

型号

ZYB－18.3

G3/4"

1.1

18.3

1.45

-0.05

1500

1.5

Y90L－4

ZYB－33.3

2.0

33.3

1500

2.2

Y100L1-4

ZYB－55

G1″

3.3

55

0.33

1500

1.5

Y90L－4

ZYB－83.3

    　 G1½"

5.0

83.3

1500

2.2

Y100L1-4

ZYB－125

Φ50

7.5

125

0.60

1000

4.0

Y132M1-6

ZYB－167

10

167

0.60

1000

4.0

Y132M1-6

ZYB－200

12

200

0.33

1500

4.0

Y112M－4

ZYB－250

15

250

0.60

1500

7.5

Y132M－4

ZYB－300

Φ70

18

300

0.36

1000

5.5

Y132M2-6

ZYB－483.3

29

483.3

1500

7.5

Y132M－4

ZYB－633

Φ100

38

633

0.28

1000

11

Y160L－6

ZYB－960

58

960

1500

18.5

Y180M－4

For more information耐磨渣油泵ZYB渣油泵
上一篇：没有了 下一篇：Gear type slag pump

与ZYB slag pumpRelated Products

ZYB-200 gear type slag pump
ZYB-200 gear type slag pump
In order to facilitate installation, ZYB200 slag pump and KB200 gear pump have the same installation size. ZYB200 slag pump flow is 12 cubic meters per hour and the temperature is within 280 degrees.
Gear type slag pump
Gear type slag pump
The gear type slag pump body and gear have high hardness and strong wear resistance. Model: ZYB. The high temperature slag pump is within 200 degrees, which is several times longer than the life of the ordinary gear pump.
ZYB960 / ZYB633 residue oil pump
ZYB960 / ZYB633 residue oil pum
ZYB633 slag pump flow rate 633 liters per minute; Zyb960 slag oil pump flow of 960 liters per minute, can transport residue, and has wear-resistant, long service life and other characteristics.
Slag pump ZYB - 300
Slag pump ZYB - 300
ZYB-300 slag oil pump than ZYB-200 slag oil pump flow is about 6 cubic meters larger, the pressure is similar, the price is slightly expensive, the diameter is also increased, please pay attention to the selection, if you have any questions,
网站首页 | 加入收藏 |  
0317-8296807
kemaiind@outlook.com

联系方式

Address： Industrial Development Zone, Hebei Province
TEL：0317-8296807 
FAX： 0317-8181816

PRODUCT CATEGORY

News

Support

TEL：0317-8296807 FAX：0317-8181816 Email：kemaiind@outlook.com
Quick Menu：China Oil Pumps | Pumps and Couplings Manufacturer In China | Oil Transfer Pumps