NYP high viscosity heavy oil pump

NYP high viscosity heavy oil pumps are available in both plain cast iron and stainless steel to deliver different fluids.

Models are: NYP7.0, NYP52 NYP111, NYP160, NYP220, NYP320, etc.

The following introduces the advantages of the product

(1) NYP high viscosity pump delivers liquid smoothly, without pulsation, with small vibration and low noise.

(2) has a strong self-priming performance.

(3) the correct selection of parts materials, can transport a variety of corrosive media, the use of temperature can be 200℃.

(4) The internal and external rotor steering is the same, with little wear and long service life.

(5) the speed of the pump and the flow of a linear function, can be appropriate to change the flow of the pump.

(6) It is especially suitable for conveying medium with high viscosity and consistency.

NYP high viscosity heavy oil pump is especially suitable for the delivery of high viscosity and consistency media.

Widely used in all kinds of fluid conveying industry, especially for dealing with viscosity change, a wide range of fluid conveying.

There are ordinary cast iron material and stainless steel material two kinds.

Pump head, pump shell, sealing cavity part can be with heat preservation jacket.

According to the actual need to choose the location of insulation.

The jacket and the pump body are cast into one body, which has good thermal insulation effect and can avoid various problems caused by welding the jacket.

When heating: heat preservation can be carried out through various heat mediums such as hot steam and heat conducting oil into the jacket cavity.

Need cooling: through various coolant, can maintain the constant temperature of the pump body.

Adjustable clearance: the pump can adjust the gear clearance according to the need of viscosity without disassembling the pump, so as to meet the technical requirements of the pump under different viscosity.

The second major advantage of the integral bearing box is that the clearance can be adjusted only by turning the bearing box.

Easy operation, no need to remove any parts of the pump.

The outer rotor drives the inner rotor to rotate in the same direction, so the wear is small and the service life is long.

 

NYP high viscosity pump is mainly composed of internal and external rotor, shaft, pump body, front cover, bracket, seal, bearing and so on.

NYP high viscosity pump all parts in contact with the material are made of stainless steel in accordance with the health standards, which can meet the requirements of all food, beverage, medicine, chemical industry and other health and corrosion resistant occasions.

NYP in high viscosity pump work, there is no wear parts (except mechanical seal), all parts contacting with materials are made of stainless steel, a pair of rotor synchronous operation in the work, maintained a certain gap between each other, not to have any contact, will not have any wear and tear, in theory, the temperature of the rotor pump can be as high as 220 degrees under various working environment.

 

NYP high viscosity pump application field:

Application industry: suitable for conveying pure and a certain viscosity of the fluid, can be used to transport oil such as lubricating oil, crude oil, etc.;

It can also be used to transport molasses, polyurethane, black and white material, rubber, asphalt, paint, adhesives, dyes, coatings, lubricants, polyols, food, drugs and other high viscosity materials without particulate impurities;

It can also be used to transport high temperature, high viscosity polymer melt materials such as PA, PB, PC, PE, PS, HIPS, ABS, PP, PET, PVA.

 

NYP high viscosity pump parameters: