Air cooled hot oil pump

Air cooled heat dissipation can be imagined to be natural heat dissipation, without the need for traditional water cooling can reach 360 degrees of high temperature conditions for use.

RY hot oil pump sealing principle:

RY air-cooled hot oil pump adopts packing packing seal. The sealing principle of packing packing is:

Due to the temperature, pressure, pH of the sealing medium, as well as the linear velocity, surface roughness, coaxiality, diameter jump, eccentricity and other factors of the equipment, the packing packing is required to have the following characteristics:

1. It has certain elastoplastic energy and good sealing effect

2, chemical stability, corrosion resistance

3, impermeability, tight

4, self lubrication, wear is relatively small

5, temperature resistance, with good high temperature resistance effect.

6. Convenient disassembly and assembly, easy to replace the seal in the future, improve efficiency.

7, packing packing simple manufacturing, low price, thus reducing operating costs.

 

RY hot oil pump is the most common kind of high temperature oil pump, daily maintenance mainly involves the following points:

1: bearing temperature between 30 degrees to 80 degrees.

2: there should be butter in the oil cup to ensure the existence of lubricating oil needed when the bearing is running.

3: The pump should be maintained after 30 days of operation, and check whether the coupling is in good condition, and pay attention to the temperature of the motor.

4: if the noise suddenly increases in operation, the pump should be stopped immediately to check whether there is a bolt loose caused by different heart.

The daily maintenance of hot oil pump generally has the above 4 points, I hope it will be helpful to you.

 

Performance parameters and selection table of RY air-cooled hot oil pump are as follows: