RY100-65-200 high temperature hot oil pump

I. This is a kind of high efficiency hot oil pump, the model is RY100-65-200;

RY series of air-cooled heat pump technology advanced, high efficiency, under the thermal state can long-term stable operation, no leakage, no additional cooling system, the use of safe and reliable characteristics of heating medium in our country has been widely used in the heating system, has entered the petroleum, chemical, rubber, plastics, pharmaceutical, textile, printing and dyeing, road construction, food, and other industrial fields,

RY series air cooling and hot oil pump is mainly used for conveying weak rot high temperature liquid which does not contain solid particles. The operating temperature is less than 370℃. It is an ideal circulating pump.

The pump is widely used in high-temperature shaping of paper box, dynamic vulcanized tire and recycled rubber machinery, flat vulcanization, rubber, drying, feed drying, printing and dyeing, chemical industry, plywood production, waterproof coil production, asphalt heating, drying of hanging noodles and other industries.

Two, RY series air cooled heat conduction oil pump structure characteristics:

 

(1)RY100-65-200 high temperature hot oil pump is the second generation of products developed on the basis of digestion and absorption of foreign oil pumps. The basic structure is single-stage single-suction cantilever foot support structure. The inlet of the pump is axial suction, the outlet is vertical upward, and the motor is mounted on the base together.

 

(2) The support of RY series air cooled heat conduction oil pump adopts the structure form of double end ball bearing support. The front end is lubricated by lubricating oil, the back end is lubricated by grease, and there is a pipe in the middle to observe the sealing situation and recover heat conduction oil at any time.

 

(3) the use of self-heat dissipation structure, change the traditional water cooling structure, the heat conduction oil pump has the advantages of simple structure, small volume, saving operating costs, good performance and reliable use.

 

(4) the combination of packing seal and mechanical seal form, packing seal with high temperature resistant packing, has good thermal adaptability, and the mechanical seal is made of high mechanical strength, good wear resistance cemented carbide material, to ensure the sealing performance under high temperature.

 

(5) the use of the third generation of polytetrafluoroethylene (PTFE) as a lip seal

RY series air cooled heat conduction oil pump is reasonable in structure, excellent in performance and reliable in use.

It is suitable for conveying high temperature liquid without solid particles.

Its corrosion resistance and the use of temperature depends on the material of the main parts in contact with the medium (divided into three categories: 1.HT200;

II. The ZG230-450;

III. 1 cr18ni9ti OCr18Ni12 - Mo2Ti)

 

Performance parameter table of RY air-cooled heat conduction oil pump