CYZ self-priming oil pump

Performance range and characteristics: the principle of CYZ self-priming oil pump is centrifugal pump, C was originally a form of Marine, but there is no clear distinction.

Botou Haina Machinery Manufacturing Co., Ltd. CYZ centrifugal oil pump flow range of 3-280 cubic meters/hour.

The pressure is normal pressure;

Motor power 0.75KW-90KW.

The pump not only has strong self-priming performance but also has a good explosion-proof effect, can be used to transport gasoline, diesel oil, kerosene and so on have a very good effect.

And high efficiency and long service life.

Centrifugal pump body and impeller are made of high quality materials, sealed with hard alloy mechanical seal, which is durable, thus simplifying the pipeline system and improving the working conditions.

It has the characteristics of simple structure, convenient operation, stable operation and easy maintenance. It has the structure characteristics of relatively easy operation. The user can completely use it in accordance with certain methods and standards, without complicated operation.

In the use of the pipeline without the bottom valve, before the work only to ensure that the pump body has a quantitative oil can be stored, to ensure the smooth completion of the work, but also to ensure the normal use of the pump body, to ensure its service life.

The centrifugal oil pump is mainly used in oil tankers or water delivery ships, and can also be used as a tank sweep pump with good tank sweep effect.

The pump has the advantages of high efficiency, long life, strong self-priming ability and so on. It can give full play to its advantages in use, improve the efficiency and quality of the work, and ensure the saving of time and material resources. It also has the advantages of long life, and is not easy to damage.

The pump has a strong self-priming capacity, suitable for oil depot, tank truck, tanker, transport large ships, chemical and petroleum enterprises of oil transportation, the maximum working pressure: 1.6MPa, temperature range -15℃~90℃.

Performance parameter table of CYZ oil pump:

Instructions for CYZ self-priming oil pump

(I) Preparation and inspection before starting CYZ oil pump:

1. The oil pumps of this series are lubricated with high-quality calcium butter and No. 10 oil respectively according to their operating conditions. If the pump is lubricated with butter, the bearing box should be filled with butter regularly; if the pump is lubricated with oil, if the oil level is insufficient, it should be filled up.

2. Check whether the liquid storage in the pump shell is higher than the upper edge of the impeller. If it is insufficient, the liquid storage can be directly injected into the pump body from the liquid filling port on the pump shell.

3. Check whether the rotating parts of the pump are stuck or knocked against.

4. Check whether the bottom foot of the pump body and the nuts at the connection are loose.

5. Check the coaxiality or parallelism of the pump shaft and the motor spindle.

6. Check whether there is air leakage in the inlet pipeline. If there is air leakage, try to remove it.

7. Open the inlet valve, slightly (not fully) open the outlet control valve.

(2) Stop the pump

1. The gate valve on the discharge line must be closed first.

2. Stop the rotation of CYZ self-priming oil pump.

3. In the cold season, the liquid storage in the pump body and the water in the cooling chamber of the bearing body should be emptised to prevent freezing and cracking of the machine parts.

Pay attention to the above details when using, if there is no clear place can consult my company sales staff.