Features and broad development prospect of stainless steel o

Stainless steel oil pump is equipped with vacuum auxiliary system called stainless steel oil pump, which is characterized by shortening the suction time of self-priming pump and improving the working efficiency of stainless steel oil pump during flood control and emergency.

Haina Stainless Steel Pumps hired professionals to design the new product.

Vacuum pump for stainless steel oil pump chamber auxiliary vacuum operation.

Vacuum reaches a certain value, the suction pipe is filled with water and quickly injected into the pump chamber, the stainless steel oil pump starts to work normally for drainage.

At this time, manual operation is adopted to pull the clutch lever from the "combined" to the "separated" state, then the clutch is idling and the vacuum pump stops working.

Stainless steel oil pump is a hydraulic machinery used for pumping water. It is composed of pump body, rotary assembly, faucet assembly, exhaust miscellaneous cover, and inlet pipe, outlet pipe and retaining net.

Start the motor, dynamic linkage, the impeller rotating assembly under the impetus of the centrifuge, bubble up, suction, the air inlet pipe, the outlet pipe discharge pump body, air net, water flows through the outlet pipe, the water pump, excellent performance, deep suction, large flow, save work assignments to save time, is the most excellent mechanical pump in the realistic society.

Stainless steel oil pump refueling unit has complex structure and more faults than submersible oil pump. Due to the negative pressure in the pipeline, it is easy to generate oil and gas to form gas resistance, etc. Submersible oil pump refueling unit has simple internal structure and low failure rate, and submersible oil pump placed in the storage tank will not break for more than ten years.

The pipeline line is relatively simple, but due to the positive pressure in the pipeline, the sealing requirements of the pipeline are higher, if there is a pipeline rupture will eject a large amount of oil.

Of course, the submersible pump system also has corresponding preventive measures.

In addition, the distribution of submersible oil pump is a little more complicated.

Stainless steel oil pump is a kind of submersible pump, because most of the submersible pump material is cast iron or plastic, only with these materials to make the submersible pump, it is difficult to meet the needs of customers, a lot of corrosive media can not be discharged, such as acid and alkaline liquid;

That's one of its features.

Another feature is that in addition to not rust, but also high temperature resistance.

Haina pump has now produced a high temperature - resistant self - priming pump.

Although it is stainless steel, but there are a lot of auxiliary materials can not withstand much high temperature, generally within 120° is no problem, such as some chemical plants need high temperature resistance of more than 200 degrees or have to choose centrifugal pump.