YCB stainless steel gear pump without oil how to do?

YCB stainless steel gear oil pump is widely used in: energy, metallurgy, chemical, textile, paper and other fields, YCB stainless steel gear oil pump mainly has the following faults: no oil, less vehicles, noise vibration, oil leakage.

Here are some common problems and countermeasures to help users.

First of all, what should YCB stainless steel gear pump do without oil?

1. The heat pump inlet and outlet valve is not opened, the inlet and outlet line is blocked, and the impeller is blocked.

Dissolve to remove blockage.

2. Importers and oil supply shortage, suction is too high, bottom valve leakage.

Stop checking and adjusting (with the inhalation tube unsolicited network and use prone to this phenomenon).

3. The pump is not filled with liquid, the air in the pump cavity.

Open the pump cover or open the vent valve to let out air.

Stainless steel gear oil pump suction pipe leakage.

Fasten the sealing surface to exclude air.

5. When the motor is running in the wrong direction, the phase speed of the motor is very slow.

Adjust motor direction and strengthen electrical wiring.

6 pipeline resistance centrifugal pump is too large, improper selection.

Reducing pipe elbow, reelection pump.